Paint Zoom Paint Sprayer

If you need an area in your house painted there's usually only two options which are available. You probably could hire a professional to take care of it but they're usually expensive. You may also do it by yourself by using regular brushes, buckets, and rollers. However they can take a long time and can also create a mess. This is the reason why a product known as the Paint Zoom was released.

This spraying tool is a brand new solution for painting that's now becoming very popular with a lot of people that like to do things themselves. This product makes it possible for pretty much everyone to have the ability to take on a painting task and have high quality results.

Paint

This product was tested in labs and has been proven to work rather well for the majority of painting tasks. It could replace the old painting compressor units, that are very large and bulky as well. They are not cost efficient and are more commonly used for automobiles and other sorts of vehicles. It is often difficult to use them to paint smaller areas.

Using the Paint Zoom sprayer you would now no longer have to rely on any brushes, since it may be a long process. In addition those rollers that were made in order to make thing simpler and quicker, may be very untidy as the paint will continue dripping and wind up being wasted. In addition, with rollers you you need to bend down to dip it into your paint a lot of times.

The Paint Zoom was made so you will not have to deal with these issues anymore. Using this product, you merely put in the container any paint you wish. Afterward all you need to do is just press the painting trigger and it'll begin to paint.

By using the Paint Zoom paint sprayer a lot of tasks which before needed hours if done manually could actually be complete in just a fraction of the time. The Paint Zoom could be used to paint both inside the home and outside. It can work on almost any kind of material. Therefore you'll be able to use it to paint doors, walls, furniture, and a lot more

The retail price of the Paint Zoom Paint Sprayer is around 0. It comes with a warranty that lasts for a year.

Paint Zoom Paint Sprayer

Learn more and find the best deals for the Paint Zoom and other home improvement products.

Friends Link : Facial Fack Mask Secret Natural Beauty Tips No-No-Acne

The Best Paint Brushes For Acrylic Paint

With all the choices in the paint supply aisle, it may be hard to determine which are the best brushes to use for acrylic painting. Here are some tips and advice to help you out.

Since acrylic paint is a thick paint compared to watercolor you should have a few sizes of stiff bristle brushes. Bristle brushes are essential for the acrylic artist. They are great for adding large quantities of paint as an under painting to the canvas and they are also superb for blending paint directly on the canvas. I have several sizes of bristle brushes and use them for blending and dry brushing as well. These brushes do wear down after a period of time, but for the amount of work they do, they are worth every dime you spend on them. The bristle brush comes in square and rounded shapes.

Paint

Another necessary brush is a liner or script brush. This brush has long soft bristles. It holds a lot of paint and is typically used for long continuous strokes such as for tree limbs or blades of grass in a landscape and hair strands in a portrait. Having a variety of liner brushes will ensure that your ready for most detail work.

The third brush I recommend is the fan brush. Beginners should use caution because they typically do not understand how to use a fan brush correctly. If used properly a fan brush can create beautiful waterfalls and pine tree effects in a painting. The trick with a fan brush is to practice until you are comfortable with what it can do for you.

A filbert brush may be useful for the acrylic artist as well. The filbert brush also holds a lot of paint and is softer than a bristle brush. This brush is often used for blending and detail work where you want a gentler touch.

There are hundreds of choices of brushes when it comes to acrylic painting needs. In reality, you only need four or five styles of brushes for starters. Don't be overwhelmed by the endless choices available. Stick to these four styles and you will be able to paint anything with acrylics!

The Best Paint Brushes For Acrylic Paint

To see acrylic tips, tricks and techniques and free step by step lessons visit Learn Painting Techniques or visit http://www.IamPainting.org The best way to begin painting is to follow prescribed instruction and get your feet wet. With a little practice, you will be well on your way to a rewarding hobby of painting.

Related : Make Up How To

How To Paint Your Car

Masking & Preparation

To begin this venture we need to clean the metal on the car. After we clean the metal, make sure it's dry before we begin to mask the car, also do a last minute check to be sure it's free of all dirt grease and other contaminants.

Paint

Now it's time to mask the car, and be sure to mask all that you don't want painted leaving no masking hanging of the car, that would get in the way of a nice paint job. The main idea of the whole thing is to produce the best quality paint possible with the given surroundings, it is preferred that you have a paint booth, but if not, make sure that the area that you use to perform the work is ultra clean and dust free.

After the car has been masked it's time to get ready to spray the primer, once again make sure that you have cleaned your surroundings, it's best to have some water on the floor to keep the dust down, once you are confident that the area is clean then you can begin checking the spray guns to be sure that they are clean. This is a very important step especially if they're not your guns, dirty guns will make an ugly paint job there for wasting all of your time.

Now that you have determined that the paint guns are clean, make sure that your respirator is in good working order. Now be sure that you have all the products that you need to perform the primer job on the car. You will need primer, reducer and catalyst, you will also need strainers, stir sticks and a measuring device.

It's best not to have to leave the paint booth during the time that your priming the car. Reducer comes in different temperatures and you need to know what temp is best for your working conditions.

The temps are as follows, their is a high temp that is designed to dry slower when it's hot in the area where your working, high temp is good for 80 degrees and up, theirs also a mid temp, this probably the most popular temp used this is best used from 55 to 80 degrees and is designed to dry faster to make up for the colder temp, due to the fact primer will run easier in the cold weather. Now we have low temp reducer this will dry extremely slow therefore for giving the primer a better chance to run. I tell you all this in an effort to help you better understand the products that you are working with, the more you know the better armed you are for problems when they happen.

Now it's time to enter the paint booth, and as you do pay attention to the booth filters and be sure that they sure clean also. Now get your can of primer and read the instructions on the side, usually the mix is 4:1 or 4 parts primer to one part reducer and a cap or two of catalyst and for the best results follow these instructions. After you spray the first coat of primer, you will need to wait 15 to 20 minute before you can spray the next and so on, the way I like to do this is to give the body work areas a coat or two first to build them up. The whole reason we use primer is is to give the paint a smooth surface to stick to and give the metal some protection from the elements, it's usually a good idea to get 4 or 5 good coats on the car.

If you are really serious about the way that you want it to look the you might want to take the primer one step farther and use an etching primer before you spray the urethane or epoxy primer, an etching primer will give the top coat just a little more to stick to. Etching primer has no building qualities there for it's not used for smoothing out waves in your work, but it will make the primer stick allot better.

I do suggest that you always use a urethane primer,and not lacquer type,as lacquer can and will shrink urethane or epoxy is recommended for best results. Epoxy is a very hard primer to sand but it's extremely tough, and urethane is I think probably your best choice,because it's high building and easy sanding, their are a lot of brands to choose from, I use DuPont euro myself but it's all up to you to choose that.

Now that your card is primed, it's time to remove the masking, and I like to do this while it's still a little wet for the sake of ease, just be very careful about how you do it, you don't want to screw up all that nice work, so just take it slow and easy while pulling the masking off your car.

(Sanding)

Well now the hard part is here, before you start to sand the car you'll want to be sure that it's been guide coated, this will make it easier for you to get an ultra smooth finish. Heres where we weed the boys form the men, if your trying to do a show finish on the car that your painting, you will want to sand it by hand with water running on it all the time.

This is the hard part,and you will have lazy people that will want to use a machine to do this, this is just a word to the wise, you have allot better control over a hand block. The best way to produce this type of high quality work is to have the best control over it that you can, offten a machine will go through your primer. If your trying to produce show quality work this would mean priming that area again I.E. more time spent, this is time that could be spent better doing other things.

Now I will explain a bit about what a guide coat is, this is it in a nut-shell. The guide coat is the step right after the car has been primed, you should do this before you pull the masking, what this in tails is misting a light coat of black paint over the primer so that you can see the low spots in your work, and no matter how good you are, you will have low spots. The idea behind this is to sand all the guide coat off with out going through to the metal on your car.

Now it's time to start the actual sanding of the car, you need to pay close attention to detail on this part of the paint job, the better you sand it, the better it will look. I usually start with 320 grit wet paper on a medium hard block, this grit is good for getting the guide coat smoothed out, their will most likely be some small low spots that will require either spot filler or more primer. This is one of those areas where you need to pay a little attention to detail, here you will need to look at the depth of the low spot and think about it, how low is it will primer alone fill it, or will it take spot filler and then primer.

Now that you've finished that part it's time to move on to the next grit of paper, I usually move to 400 grit on a medium- hard sanding block from here, you don't want to move up to far because it can leave scratches form the previous grit of paper, so a word to the wise, don't get in a hurry and move up to far a once this will leave seeable scratches in your work. After you've sanded the whole car with the 400 grit wet paper then inspect it for bare metal and guide coat still there.

The whole idea with sanding is to make the primer look the way that you want the paint to look, I sand my primer until it has a smooth shiny finish on it, as if it were the paint on the car.

You need to have a vision of how you want it to look, the one thing that you need to know is, the better you want it to look, the more you will pay for materials. Just a word of caution cheap paint materials are just exactly that cheap!!!!! and don't use them if you want a nice paint job.

You might save some money but you will not save the agony of a crappy looking paint job. Think about this before you go and buy cheap primers and paints, do I love my car or is it just some turd to push me to work and the old ladies and back, if you love your car then don't put cheap crap on it.

Now that I'm through with my little lecture on low quality products, it's time to move on to the next sanding step. From 400 grit I usually move up to 600 grit wet paper, this is where I usually stop unless requested to go one more step, this is really as far as you need to go with the sanding. After you finish with the 600 grit do one final inspection of the work before cleaning it.

Well now it's time to clean the car, for this just use soap and water, just like washing a car normally. You should blow it dry though, this being the main difference between this and a regular wash job, be sure to blow all the water out of the little cracks in the car, like the cowl area, under the hood, between the doors and in the trunk lid. Believe me this will blow water on your paint during the actual painting of the car, so be very through about this step.

If you miss some and it happens to get in your paint during the spraying process it will bubble the paint, the paint will look horrible so be sure to get all of the water out of the car first.

Now it's to mask for the actual paint, for this refer back to the top of this page. Masking right is an art and you better take this part very serious if you want a good job.

Now that you've masked your car it's time to put it in the paint booth, hopefully this is a temperature controlled booth, in any case when you roll that car in the booth all you should have to do is clean and spray, again before you put your car in the booth make sure that it's ultra clean in there and ready to go.

Now make sure that you have everything you need in there to paint the car I.E. paint, reducer, catalyst, stir sticks, strainers and stir sticks and a measuring stick. Once again check your respirator and be sure that it's working properly, tie your hair back and if you have a beard cover your face.

Follow all instructions on the back of the paint can to the letter or it could cause problems with the out come of your paint.

Now that you have the car in the booth, be sure to double check the masking on it, what you are looking for here is perfection and nothing less.

This means everything that if you don't want it painted it must be masked for sure, their is no room for error here. Now you need to take a look at the supplies that you have to do the job with, and inventory them to be sure that you have everything you need to complete the job, the last thing you need is to find that you don't have something right in the middle of painting the car. Here's a list of what you will need for the job.

Supply List

1) Paint

2) sealer

3) reducer

4) Catalyst

5) Tack Cloths, preferably designed for clear coat

6) Measuring Cups

7) Stir Sticks

8) Measuring Stick

9) Strainers

10) Respirator in working order

Now I will give you a few things to think about, if your painting with metallic paints then you must pay allot attention to the settings on your paint gun. Metallic paints will tend to get lighter if the pressure goes up and darker if it goes down, your fluid flow and fan on your gun will also effect this.

Now I will give you a basic mixing chart, most paints will follow this chart.

Instructions

1) get your paint ready to pour.

2) make sure that your mixing cup is clean.

3) Get your strainer and sticks.

4) Put a strainer in the top of the measuring cup.

5) Now pay close attention to the level of paint in the cup.

Paint Mixing Table. Always be sure to read and follow the paint manufactures mixing guide lines. These mixing ratios are just a basic idea of what to do, things will change with different manufactures.

Recommended Air Pressure At Gun Head. Paint Mix Ratios. Paint Product.
25-40 PSI Mix 4:1:1 Base Coat

25-40 PSI Mix 4:1:1 Sealer

25-40 PSI Mix 4:1:1 Clear Coat

25-40 PSI Mix 2:1:1 Primer Coat

When using a paint gun, you try to achieve a certain spray pattern without any heavy or light areas, in the pattern chart above you would try to achieve pattern (A).

Now a lesson on gun angle. Their are only two angles you should ever need to use when holding a spray gun, and they are 45 and 90 degrees angles to the surface of the car that you are spraying, these angles will give you the best outcome possible, and also you should try to keep the spray gun at about 6 to 8 inches from your work. If you get much closer you will more then likely cause a run in the paint and, much more distance and you will get a dry look to your paint job, you also need to get a feel for the speed that you need to move the gun according to the air pressure and fluid flow of the gun.

• muscle car information
• Local Auto Shop Search

How To Paint Your Car

I've been in the automotive business for about 20 or 25 years, I have worked in all facets of the industry, from parts to restoration, all different makes and models, I just want to keep people interested in the old cars because it's where my heart is.

http://autorevival.com

Thanks To : Make Up How To Facial Fack Mask

Paint, Paint, Paint - Oil Painting At Home

Painting Information

Oil Painting

Paint

You are never to young or old to start painting if you have the desire. I was gifted with creative and artistic abilities in many forms of Art, not just oil painting or watercolor painting. If you want to paint and have patience while learning the techniques and learn what your painting instruments can do for you, then you will turn out paintings that you will be proud of and want to share with others. Whether it is in the basement, garage, outside on the patio, find a place to set up to paint and let your imagination go. This article is just about the basics of what you will need if you are just starting out to paint. If there is enough interest then there will be other articles about painting, not only with oil paints but also in watercolor paint. I love them both the same. Totally different supplies and techniques.

Lets start by getting together what you will need before you start to paint:

You will need something to paint on: a cloth Canvas, and they come in a variety of sizes. I would suggest starting with a smaller but comfortable size (16x20) that isn't too small and isn't too large. You can also buy them in bulk, already primed, or you can also stretch your own canvas if you want.

Next you will need a easel to paint on: Easel's come in different forms: tabletop, standing, aluminum, wood....if you are truly interested in taking up painting as a hobby I would suggest paying good money for a sturdy one that fits your needs when you paint. Don't buy a tabletop if you plan on doing larger paintings. Standing easels are a good so that you can stand back and look at the painting, it will also be about the same angle and height as it would when hung on the wall.

Paint Brushes: choosing the correct Paint Brush is very important and can make a significant difference in the quality of your finished work. Make sure you buy paint brushes for oil paints. The length of the brush should be longer due to most oil painters stand up when they are painting. If you are going to do a lot of small detail it is best to buy a sable hair brush and it doesn't show the brush strokes as bad. You will want to also buy Artist Grade paint brushes and not the cheap hog-hair brushes. Your results will show the quality of brush you used. There are many types of brushes; filbert, round, fan, liner, 1", 2"....etc. You will also want to make sure you take care of your brushes when cleaning and storing them. Use a odorless thinner, you can also buy conditioner for your brushes. Store them flat or at least in a place that will keep the bristles from becoming distorted.

Paint (Oils): Oil Paints come in a variety of manufacturer's. I use Bob Ross paints and supplies. I find his paint is creamy and easy to work with. I suggest getting one of his Beginner or Master kits for starting out. Paint is very expensive and as you learn you will find that you will not use quite as much paint as you did in the beginning. It really takes very little. These kits will also give you the basic colors you will need because there a lot of color pigments out there to choose from. Buy the paint according to what you want to paint. You will not want to buy floral paint if you are going to paint landscape.

Odorless Thinner for paint: Odorless Thinner if you have painted before you know the smell of turpentine or solvents. This will do the job well and has a low smell.

Pallet Knives to paint with: Pallet Knives these are a must especially when you go to apply snow or shading on your mountains or cutting in water lines. There are different sizes and shapes so buy according to what you will be painting.

Pallet: there are different types of pallets to hold your paint. There are disposable sheets that you just throw away when your done with the painting or there are plastic and wooded ones. I usually put too much paint on my pallet and I just put some plastic wrap or aluminum foil over the paints and throw in the freezer. The paints will set up and become hard to work with if you leave them out.

Liquid Mediums & Gesso for painting: Mediums & Gesso these items will really help you in your painting. The liquid mediums help the paint to go on easier and help in blending. Use the Liquid white to prep your canvas and you will be amazed, use very little, it can also be used to thin down your titanium white paint when you go to put in water or snow on your mountains or mix a little with paint for highlighting, say trees. It helps the paint stick. Liquid clear is great for black or grey canvases, it does the same thing except there is no color. The Gesso's (water-based) are use to prime the canvas. DO NOT use your good brushes to prime your canvas. I use those cheap sponge brushes and just discard when finished. Then let the canvas completely dry before working with it. This usually comes in white, black and grey.

Misc. Items to use when to paint: You willl need plenty of papertowels, a paint brush cleaning can with a screen in the bottom of it, drop cloth if you don't want to get paint and thinner all over everything, and clothes you don't care about. To get ideas and learn other's techniques on oil painting , you can watch programs on TV (usually OPB in Oregon), the internet ( YouTube), purchase painting videos, or take a beginner's class at the local college or art supply store.

Well I hope this helps in pursuit of a enjoyable, fun, and relaxing experience for you as you create works of Art in your new found love of painting with oils. Happy Painting.

You can see some of my work on the website below.

Paint, Paint, Paint - Oil Painting At Home

http://www.freewebs.com/lszela63

Tags : No-No-Acne Facial Fack Mask

Enamel Paint and Acrylic Paint - Know The Difference

The difference between enamel paint and acrylic paint might be unclear to some people. Since both are used in arts painting, they are often confused with each other. Because each one possesses one or more characteristics that make it more ideal to use for a certain type of material over the other, knowing what these properties are will definitely help us go through with any arts and crafts project we encounter in the future.

Like many other products and services, acrylic and enamel paints have their own sets of pros and cons. Let me run you through some of them.

Paint

Enamel paint comes in many types, including water-based enamel paints and oil-based enamel paints. You can choose which one to use depending on the demands of your project. The water-based type dries faster and is less pungent than the latter type. Enamel paints take as long as 24 hours to air dry.

Acrylic, on the other hand, dries much faster than enamel because it is water-based. The paint will harden as soon as thirty minutes after application.

When we talk about the base, enamels are often oil-based and they need to be mixed with mineral spirits to thin. Acrylic, like what I pointed out earlier, is water-based, so it is a better choice when there are safety and ventilation issues involved when painting.

Since oil-based and water-based enamel paints are mostly used in industrial operations, they are available in limited colors. However, it is still possible to enjoy different shades by combining and mixing the hues available. They can be purchased in different can sizes. Acrylics are offered in multiple varieties of colors, so they are the ideal paint for fine artists. They are sold in tubes like toothpaste.

If you are thinking of doing some renovation in your kitchen and bathroom, enamels are what you need. They are durable and hard enough when dry and they are definitely washable. Acrylics are the most suitable paint for an artist to use and it can also be a great alternative to fabric paint.

Do not forget to practice the proper safety measures to avoid any accidents when painting. Make sure that you abide to the instructions printed on the paint labels to achieve the look and quality that you are working on.

Enamel Paint and Acrylic Paint - Know The Difference

Want to find out more about Enamel Water Based, then visit Mart Backer's site on how to choose the best Water Based Enamel Paint for your needs.

Friends Link : No-No-Acne

Paint Finishes - Which Ones to Use on Walls, Ceilings, Trim, Bathrooms, Kitchens, Etc

For those of you who are reading this article right now about how to choose the right paint finishes congratulations. You are a cut above the rest of the crowd who think eggshell is a color.

Before becoming a house painter, I was just about as naive as everyone else when it came to sheen levels. So I figured this article may be of help to you in making a decision, which paint finish or sheen level you will want to use on various parts of your house. I hope this information will help give you some fresh new ideas.

Paint

Flat Finish' Great for ceilings if it's a true flat. Most flats are not a true flat and will cause streaking which is noticeable on ceilings. Because of the wash ability factor of some paints, many paint manufactures add a bit of sheen to the mix, not giving you a true flat.

The old alkyd flat paint finishes were durable, smooth and highly washable but alkyd or oil base paint is just about a thing of the past due to government restrictions on V.O.C. levels in paint.

You can buy regular ceiling paint, which is a true flat. So I suggest using that. The only exceptions would be kitchens and bathrooms. It's best to use something washable on these ceilings like an eggshell or Matt finish.

Matt Finish - this sheen is ideal for walls. Some of the newer lines of Matt finishes have micro ceramic bead technology in the paint giving them the appearance of a true flat, yet the smoothness and the scrub resistance of an alkyd flat. Most of the cheaper lines of latex wall paint will leave burnish marks if you go to scrub on them.

Matt is very architectural looking as well as washable for fingerprints or smudges. I like using it in bathrooms for walls and for ceilings as well. In other rooms I use it just on the walls and use a dead flat ceiling paint on the ceiling.

Eggshell Finish - This sheen is used a lot for walls, hallways, kitchens and bathrooms. Because of the angular sheen level you get a better more washable surface in a latex formula. I used to use eggshell before the newer ceramic Matt finish came along.

Satin Finish - This sheen is best used for woodwork, trim, windows and doors. Many people make the mistake of using semi-gloss. Semi-gloss is way too tacky looking. The satin finish or sheen level is what I use for woodwork and trim either in latex or oil base. It's the norm in all upper class homes.

Semi-Gloss - This was used mostly in the old days for bathrooms, kitchens, hallways, woodwork and trim. Porch floors, basement floors, etc. would be the only modern day exception. Every since I started painting homes back in 1991 I have only used semi-gloss a couple of times. It's that rare.

Gloss Finish - This sheen is common for front entryways. If you can picture seeing a large white front entryway complete with side windows all encased in wood as you are entering a fancy home you will see that some are done in a high gloss white. And most of the time it's alkyd or oil base formula.

As far as I'm concerned, that is about it for gloss. I did have to do some doors in a house once using high gloss for a dentist. He wanted them to look like pearly white teeth I am guessing!

That is about all there is to it for sheen levels other than for exterior painting. For outside painting I will use a low luster finish, (which is comparable to an eggshell) or a satin finish when it comes to exterior siding, trim, doors, etc. I just match the sheen level that was used before unless the customer wants something different.

Paint Finishes - Which Ones to Use on Walls, Ceilings, Trim, Bathrooms, Kitchens, Etc

Lee Cusano has owned his own successful painting business since 1991. He has also helped many others to start their own painting business with his "Paint Like a Pro Estimating and Advertising System". Lee also offers a new free report titled "How To Quit Your Day Job This Week and Double or Triple Your Income". To get it please go to http://www.Painting-Business.com

My Links : Cosmetics Plus Facial Fack Mask

Choosing an Airbrush Makeup Machine

Choosing an airbrush makeup machine can be a difficult decision to make. For most people who are just starting with airbrush makeup, it is hard to make a choice between all of the different brands and products out there. Here I will outline some of the most important things to consider.

Firstly, you should always look for good value for money. This goes without saying but in the cosmetics industry you need to be particularly careful as there are a large number of products which will take your hard earned money and not give you very much in return.

Makeup

Having said this, it is particularly important to get a good quality product. There are a number of airbrush makeup machines which are really just not worth the money that they cost and are liable to break repeatedly. It is therefore advisable that you go with a brand which has been around for many years and has a good reputation. Products which have only recently released are more prone to errors and are generally not produced by people who actually use them every day in salons. It is important to choose a brand name which will last and also one which can be relied upon for technical support and help 10 years down the line.

It is important, then, to make sure that you choose a machine that will be right for your needs. Is this your profession or are you just interested in giving it a go? Different products are geared towards different people. Some come with instructional DVDs whereas others expect you to know what you are doing straight away.

There are also a couple of technical aspects that need to be considered. One of the most important is the difference between single and dual action airbrushes. A single action airbrush means that you need to move the brush closer or further from the subject to control the amount applied whereas a dual action one has a trigger. Dual action airbrushes are generally easier to use but can cost a little more. All of this needs to be factored into the equation.

Finally, make sure that you get a product that has good reviews. This is similar to my advice about a good brand and I really cannot stress it enough. Many people find it difficult to choose a good airbrush makeup machine precisely because there is so little information available about them. Some companies capitalize on this and will extort your money. Therefore make sure that you go with a well respected brand that has been around for a while and has good reviews.

Choosing an Airbrush Makeup Machine

If you want to read some reviews about airbrush makeup machines, see these Airbrush Makeup reviews.

My Links : Make Up How To

Breathing Paint Fumes - What's at Risk and How to Eliminate Paint Fumes From Your Air

 Paint is a relatively easy and inexpensive way to give a room or home a quick makeover. But what do you risk health wise by inhaling paint fumes and how can you eliminate them?
 
What you risk depends on the paint that was used. Oil paint or any paint that contains volatile organic chemicals has elements in it that evaporate easily into the air. Examples are solvents, thinners that maintain an even consistency, and drying agents that help the paint dry faster. These are often the ingredients that off gas and can make paint fumes so harmful.
 
You may first notice a headache, watery or burning eyes or nose, dry throat, light headedness, dizziness, or nausea. This is your body's way of saying get me out of here and away from these paint fumes! Generally these symptoms will disappear if you are only exposed to the fumes for a very short time. But often paint will off gas fumes for weeks, forcing you and all who live in the newly painted space to continue to inhale these fumes over a long period of time.
 
Young children are particularly vulnerable to these fumes because their respiration is comparatively fast, and their bodies are smaller which means their bodies are subjected to much more of the paint fumes than a healthy adult. Pregnant mothers also risk harm to the developing fetus, and continued exposure can interfere with normal growth and development. Older adults are also more at risk many times because of pre-existing conditions such as heart problems, respiratory conditions such as asthma or bronchitis, and/or an immune system that is in some way compromised.
 
There are paints available now that contain low and even no volatile organic chemicals. They are more expensive, but certainly worth the extra money for the health advantages they provide. But if you've moved into an apartment or newly constructed home, you may not have control over the paint that was used, and unless you act, you and your family may in fact be forced to just live in this unhealthy environment.
 
A high efficiency particle arresting (abbreviated as HEPA) air purifier that has a filter that specifically targets and removes these fumes can clear the air and make the air quality in your home healthy again. How does it do this? It is designed to run 24 hours a day to continuously removing these paint fumes from your air as soon as they off gas.
 
By opting for a HEPA air purifier you also get the added advantage of a cleaner that can remove other household particulates that may have resulted from new construction or a home makeover. This filter by definition is designed to remove normal household pollutants such as household dust, dust mites, mold and mildew spores, pollen, pet dander, bacteria and viruses all as small as .3 microns.
 
The best of these air cleaners contain 4 filters built into one easy-to-change canister, each with a different purpose making it a powerful yet compact and very efficient solution to removing paint fumes from your air.

Paint

Breathing Paint Fumes - What's at Risk and How to Eliminate Paint Fumes From Your Air

An excellent HEPA air purifier to remove paint fumes from your air is offered by PurerAir.com-- the HealthMate Plus Purifier See it now at http://purerair.com/healthmate_plus.html

Thanks To : Facial Fack Mask

Choosing Paint Sheen - Flat, Satin, Eggshell, Semi-gloss, & Gloss

Choosing paint can be confusing at first as there are so many paints on the market. But with a little understanding of the different types of paint, you will quickly become a paint finish expert!

The most common types of paint are: Flat, satin or eggshell, semi-gloss, and gloss.

Paint

What is Paint Sheen?
Paint sheen is the level of glossiness in paint. In other words, high gloss paint will make your walls look somewhat shiny while a flat paint won't have any shine. This is important for you because certain sheen paints a better for certain rooms in your home. For example, flat paint conceals scratches and other pre existing wall imperfections well, so it would be a good choice for hallway walls in a household with children. Read below to learn about each paint sheen type.

Flat Paint

• Commonly used on most walls
• Lowest sheen
• Smooth, matte finish
• Non-reflective
• Conceals wall imperfections
• Best for painting uneven surfaces or drywall

Satin or Eggshell

• Low-luster
• Slight sheen
• Brings warmth and depth to a room
• Easier to clean than compared to flat paint

Semi-Gloss

• Very durable
• Easiest to clean
• Does NOT conceal imperfections
• Often used in kitchens and bathrooms
• Also frequently used in children's bedrooms

Gloss

• Most durable of all paints
• Highest sheen
• Used for doors being that it is so durable
• Good for trimming baseboard and door frames

Additional Considerations: Oil or Latex Paint?
Most paints come with a base option of oil or latex. Your decision will be based on several factors such as what surface you will be painting and what room you will be applying the paint to.

Oil Paint

• Better Abrasion resistance
• Higher gloss
• More durable then latex
• Smoother application than latex
• Seals stains well
• Harder to clean up after using oil based paint

Latex Paint

• More popular because It's easier to clean up, less odor, and overall easier to manage
• Water Based
• Fast drying
• Easy to apply
• Resists yellowing, fading and mildew
• Good for metal surfaces
• Best bet for kitchens, bathrooms and laundry rooms

Choosing Paint Sheen - Flat, Satin, Eggshell, Semi-gloss, & Gloss

Marcy Tate is a content writer for Networx.com and has been working in the home improvement industry for over 10 years.

At Networx.com, we connect you with local, professional contractors who are screened by us and reviewed by you. Need help with your painting project? Make sure you click this link to Painting Networx to find a reliable, local, professional, licensed Painter in your area and to receive free quotes for your painting project.

Friends Link : No-No-Acne

What Color Eye Shadow Works with Green Eyes? How to Choose Makeup Colors Perfectly

Do you know how to create beautiful, stunning eyes that really pop? Do you want the first thing people see when they look at you be your beautiful green eyes? The real secret to makeup is to complement what you already have naturally. This is especially true with eye shadow. The colors you choose can make all the difference.

The eyes are one of the first things that are noticed when you look at a person. They are the focal point that can be beautifully accented in many different ways. Eye makeup defines the eyes even more and you can be as creative as you like. However, there are certain colors that you can use to really make green eyes stand out to the world.

Makeup

Colors, Colors, Colors

So what shades can you put on your green eyes to make them stand out? Despite what you may have heard, avoid greens. All green eye shadow does is camouflage your gorgeous eyes. To make your eyes stand out, you need a shade that contrasts yet complements your green eye shade.

Some great color ideas for green eyes include:

o Plums

o Purple

o Violet

Don't be afraid to experiment with bolder, brighter colors. If you have light skin, you will want to go with a brown-hued eyeliner instead of black or even a plum or purple shade of eyeliner.

Put the color eyeliner in the corners of your bottom eyelash area then line the whole top lashes with the same color. Next try a light color eye shadow and put it on your brow bone area then a darker shade on your lid.

There are so many different types of products available today that you are not limited to what type and colors you use. Now you can accessorize your eyes with a beautiful array of powders, creams and glittery dustings. Also note that Almay has a line of eye makeup specifically for green eyes that you might want to try out.

Eye Makeup Application Tips

When applying your eye shadow, the proper technique can create that 'pop' more than the actual makeup color. So take the time to learn the proper application process to get the most from your eye makeup.

Traditional eye shadow powders are very easy to use with small applicator brushes and foam pads. For a dimensional look, blend two colors of powder or one color of powder on top of a cream shadow base. You might choose to use your own brushes instead of the brushes and applicators that come in the packaging of makeup. This way you can have longer brush handles and more control over the application.

With cream-based eye shadows, remember that less really is more. The cream shadows generally come in small squeeze tubes that really enhance the look of your eyes with a light application across the lid, reaching up to your brows if you wish. You may use a small tipped brush or a Q-tip to help you apply the crème properly.

Running or 'melting' eye shadow - Melting eye shadow is a problem for many women, but there is a way to make it 'stick' a little longer. If you use a damp eye shadow brush and apply a layer of face powder to your lids and allow setting; the shadow will stay in place for the day.

Eye Makeup Safety Tips

The eyes are also a very sensitive part of the body. It's very easy to get infections in the eye and to do so can affect your eyesight permanently.

You should never share eye makeup this could cause eye infections. Try not to get makeup in your eyes, if you do rinse them out as quickly as possible with warm water. Be extra careful if you were contact lenses.

Eye Care

The right eye shadow won't matter when your eyes are puffy, swollen or red. You need to know how to take care of this delicate area of the eye so that your green eyes always look their best. Below are some basic eye care tips that will help your eyes look hot both day and night.

1. Get enough sleep at night.

2. Drink lots of water each day.

3. Avoid salty foods that cause you to retain water.

4. Certain moisturizers not designed for the eye area can create puffiness.

5. Before applying eye make up, soothe puffy eyes with a metal spoon held under cold water for a few minutes and then gently pressed onto the eye area.

6. Cool cucumber slices on the eyes at the end of the day are a great soothing technique.

7. Elevate your head while you sleep if you tend to wake up with 'bags under your eyes'.

8. Always remove your eye makeup completely before going to bed.

9. Avoid using harsh chemicals to remove your eye makeup.

10. Keep contacts cleaned and changed regularly.

Following these steps can keep your eyes looking fresh and young so they will be even more beautiful when you expertly apply your makeup.

Importance of Removing Eye Makeup

It is vital to remove all makeup before going to bed at night. It is needed to keep your skin healthy. If you leave makeup on your face it could lead to clogged pores and dull looking skin, but leaving eye makeup on can lead to infection occurring in the eyes.

It can also cause you to have red irritated eyes. No matter how tired you are always take a few minutes to remove the makeup for your own benefit. If the area around your eyes become irritated you could begin to have an allergic reaction in this area. Not only could your eyes become red, but you could also experience pain and itching of the eyes. Repeatedly applying makeup to already irritated skin will make things much worse.

Of course, removing eye makeup is the hardest of all makeup to remove. However, there are a few tips that can help in this area. They are listed below.

* Vaseline

* Olive oil

* Cold cream

* Baby oil

Whichever method you use to remove eye makeup, you can still follow the same basic directions. Take a cotton ball with the cleaning product and gently wipe over the eye lids, then if needed you can use a warm damp washcloth to remove the cleaning product.

What Color Eye Shadow Works with Green Eyes? How to Choose Makeup Colors Perfectly

Simon Petch is a successful writer and Internet Publisher providing valuable tips, advice and product reviews on all aspects of beauty [http://www.no1-in-beauty.com/] care including reviews of womens perfume [http://www.no1-in-beauty.com/womens_perfume.htm] and mens cologne [http://www.no1-in-beauty.com/mens_cologne.htm].

My Links : Cosmetics Plus Secret Natural Beauty Tips Facial Fack Mask

How To Paint A Wooden Boat

One of the great increasing mysteries of today's modern boatbuilding is the amount of hi-tech gobble-de-gook that the average home boat builder is expected to wade through when the time comes to paint the boat after the horrendous amount of sanding, fairing and hard work is (mostly) over and the fruits of your labour now require a shiny deep lustre that the painting now promises to bring. This part, to my mind at least, is one of the best parts of boatbuilding, the finish! (Well, at least the start of the finish!)

Painting a boat used to be a reasonably simple task. All one needed was a fine dry day, one of Dad's paintbrushes, some turps, a roll of masking tape, a bit of pink primer left over from the decorating and a half gallon of shiny blue enamel paint from the local hardware store...they were the days!

Paint

Not so today, my friends! The unsuspecting boat builder who toddles off to the local chandlery or superstore best be prepared for the very worst- not only will he (or she) face a huge financial onslaught on their wallet but a mind boggling array of hi-tech whiz wow balderdash that the (generally) uninformed shop assistant will proceed to throw in their general direction in the faint hope that you will give in under the stress and buy several litres of the latest polurethanicalslitheryaminomolecular goop that's just come in. For example, you'll be faced with trade names like 'Interlux Interthane coating'. I mean, come on, it sounds like a new space invaders game! This is bloody paint! There are many others but I'm sure you get the gist of what I'm saying.

Another example of the kind of thing that drives me nuts is that you can expect to buy several litres of a iso-cyanate two pack marine polyurethane paint only to be cheerfully told its illegal to spray it unless you have a proper licenced premises to do so, drone drone!! I suppose they have to make up new names to go with the new paint company policies of charging up to 0 a litre for some of these new fangled paints! What the hell have they discovered that's so expensive to put in this stuff? I was under the impression that paint was a few litres of linseed oil, turps, some drying agents and a few ounces of pigments for colour...can I really be so out of touch?

BACK TO BASICS

So, why do we paint wooden boats? Or any other boat for that matter? The first part of that question is easy. Boats look much smarter and better if they shine and gleam a bit... it's only human nature after all. The second part to that question is: We want to protect it. Ok, from what? Well, wood rots if you don't paint it, right? - wrong! Wood left to its own devices does not rot. Wood only rots as a result of its environment. There are multiple cases of how, plain untreated wood can last for centuries as long as it is in the correct environment. There are basically only a few elements that start wood rotting. Biological attack from spores, fungi, temperature, high humidity or total absorption, physical attack from marine borers and crustaceans that allow ingress to all the other elements aforementioned.

Don't let's forget that polluted waters can degrade timber to the point where it will rot....we'll add chemical attack to that list too. So, in view of all these very compelling reasons we protect our boat by painting it to coat it fully against these assaults.

PREPARATION OF TIMBER

The actual preparation of timber can cover a range of differing requirements. If your boat is a new build you won't have to go through many of the preparatory stages that an older boat may have to go through. With some forms of boatbuilding where a boat has been built by a different method such as strip planking or cold moulding, we paint the boat as if it were a fibreglass boat, due to the fact that either layers of fibreglass cover the timber or that the timber has been coated with epoxy that does not allow conventional paints to adhere to it properly. However, if we wish to protect bare timber then we use a different tack. Timber in its bare natural state has millions of thin hollow tubes running through it, constructed of cellulose in its natural form. We have to seal these tubes to prevent the ingress of water into them. Therefore we seal and coat the timber first of all.

The first thing we do is to clean and remove any loose and flaking or damaged paint plus any dirt that remains on the hull - sounds easy if you say it quick but it must be done! If necessary (and most times it is) degrease the hull using a proprietary paint degreaser after removing all dust preferably with a vacuum cleaner. Don't forget it won't be absolutely necessary to get all the hull back to bare wood just dry, clean, grease and dust free.

FILLING AND IMPERFECTIONS

Obviously, not many timber craft are perfect on the outside. There are many blemishes, cracks, imperfections and splits both large and small to deal with by filling them and sanding them flush before priming the boat. It's a bit of a chore but time spent here will reward you with a boat that will certainly look better plus have a longer life. Some folks fill these holes and imperfections in timber with epoxy filler but it is not a good idea. Sometime later, for example, when the boat has to undergo a repair, it will be the very devil of a job to remove the epoxy from a fastening hole. It's best to use some kind of proper timber filler that dries hard and fast but is never that hard that it can't be removed later on. For example, painter's glazing compound is a fairly hard setting soft paste that can be quickly applied then sanded and painted satisfactorily. Carvel boats usually have their seams filled fair with a special seam compound AFTER the boat has been primed. Once the boat has been filled and faired smooth and all dust removed we are ready to put some actual paint on. Remember, the difference between a professional paint job and an amateur is the PREPARATION!

WOOD PRESERVATIVE

There are two schools of thought about treating bare timber with wood preservatives. I've heard stories that primers and paints don't adhere to many of them. In my case, I have never personally had that happen to me, so I am generally in favour of using them. Nevertheless, I am convinced that in many cases where the paint refuses to stick to timber is because the wood has not properly dried out after application. There is a definite percentage of humidity level that every timber has (and most of them differ slightly) where paint of any description simply won't stick. It can be up to fifteen per cent in some timbers. Above all, ensure that your timber is dry enough to allow any paint or filler to adhere to it. Remember too that salt deposits on timber will readily contain water and keep it damp.... if your boat was in salty water wash it off in fresh before commencing painting. When and only when, your timber preservative is dry the next stage is:

PRIMER

The first coat of primer to go onto your hull is metallic grey primer. It is a good primer to use because it is made up of millions of microscopic flat metal (aluminium) plates that lie on top of each other giving water a very hard time to pass though it...Pink primer for example, has circular molecules of substances therefore allowing water to ingress a lot quicker...fact! Grey primers also contain certain oils and most have anti-mould agents contained within (biocides to you and I) We put two coats of grey primer above the waterline and three, no less, below it.

SOME OTHER OBSERVATIONS ABOUT PRIMERS

There are a whole world of paint primers out there and confusion about their qualities are very common. For basic dry timbers, the grey metallic primers are good as previously explained. Also many oil-based primers from well-known companies are also very good and will do the job perfectly well. Hi-build primers however must be approached with caution and I must say that I have never personally got on too well with them. Most of them contain Titanium Dioxide (that's talcum powder to us lot) and even when it is fully cured can absorb copious amounts of moisture that can prevent really good paint adhesion. To avoid this only paint hi-build primers on good clear dry days and avoid excessive atmospheric humidity levels. Then, as soon as is possible apply the topcoats to seal them in. Note too, that hi-build primers are a soft type of paint and can suffer badly from scuffing over stony or shingly beaches and even when launching from boat trailers. When sanding these primers remember that huge clouds of white dust are released so be aware of where you sand and wear appropriate safety masks.

TOPCOATS

Once again, there are many types to choose from. Let's get the two- packs out of the way first. TWO-PACK POLYURETHANES have to be applied over a two-pack epoxy undercoat first of all. They have a fantastic finish and that's fine but you must be absolutely sure that the timber underneath is not going to move because the paint cures so hard that it can and will crack (strip plankers and cold moulded boats are your best bet here...apart of course from glass boats). The primary reason is that timber constructed boats move or 'work' as it is known. You may well get away with it if your timber boat has been glassed from new....not glassed over later as a preventative method to stop leaks. Rarely boats treated thus dry out properly and are still susceptible to movement as the timber inside the glass either rots because it was wet or it dries out too much and shrinks. Also boats that have been chined properly, that is, strips of timber glued in between the planks instead of being caulked, stand a reasonable chance of not moving.

Ok, what else? One pack or single pack polyurethane paints can be a good choice for a topcoat...they are almost as glossy and as durable as the two-packs but not quite! They are however, less expensive and far easier to apply than the two-packs... there are a multitude of them out there, so a bit of research is required plus your own personal choice...I'm not going to get involved in a slanging match about which ones are the best! However, remember most major well-known paint manufacturer's products are usually ok! It's your call!

So next on my list are marine enamels. Once again, it pays to remember that anything with MARINE in front of it is usually expensive...a good place to avoid in this quest is the large hardware chain stores that sport one or two paints in this category and I've fallen for it myself before now. It's the Name we are looking for!

Even with decent quality marine enamels some of the whites have been known to yellow with age and the way round this is to buy the off-white colours such as cream or buff. My last choice in Marine enamels proper, is a relative newcomer...a water-based enamel. I personally have never used any but I have heard some good reports and there has to be a few advantages with them, quick cleanup for one and you can even drink the thinners!

ASSORTED CHOICES
There are a few types of paint systems that are different to the abovementioned and as usual they probably will draw a lot of flack from those types that love writing to the editor for some reason or the other. Mainly I suspect, because something isn't quite conventional. Each of the following paints has their different uses and attributes.

HOUSE PAINT ENAMELS

Over the years the quality of house paint enamels has been increasing dramatically to the point where many yachties I know paint their boats with it. It's a bit softer (and definitely cheaper) than most single pack polyurethanes and some colours, mostly the darker hues, tend to fade earlier than others. However, the fact remains that they can be an excellent choice especially if you own a small boat and don't mind repainting it every couple of years....cheap to buy, easy to apply!

WATER BASED ACRYLICS

A few years ago you wouldn't have dreamed of painting your boat with acrylic paint....it would have peeled off in great strips. That does not apply today however. My own boat, The NICKY J has been painted using Wattyl's Acrylic semi-gloss "CANE" and it is really amazing. I used gloss for the hull and semi-gloss for the decks over white epoxy primer single pack and it has been really good. Never once has it even looked like delaminating. I paint the boat once a year with a roller and it takes less than a day...and she's forty two feet long! It is yet another choice!

Well there's your main paint choices but I urge you to remember one thing...preparation is King... it will save you plenty of money in the long run, for sure.

HOW TO APPLY YOUR PAINT

There are of course, three main methods of applying your paints; Spraying, brushing and rollering. There's another that many people use, a combination of the last two, rolling and tipping, we'll deal with that one later.

Let's take a look at spraying. There are several pre-requisites for a decent spray job. These usually are a decent workshop complete with suction fans and half decent ventilation using good spray gear (cheapo underpowered stuff just doesn't cut the mustard) and most importantly, adequate and proper safety gear. There are always exceptions to the rule and there's one chap who works in Edge's boatyard outside in the weather and he does a fantastic job...imagine how much better he might be if he worked indoors!! You will also have to watch the weather, high humidity is not good and also where the overspray goes...not over anyone's car as is so often the case! A good excess of paint is lost and wasted in the process. If you have a driving need for you boat to look like your car then sprayings for you! Oh yeah, it quick(ish) too!

Brushing by hand can yield incredible results if you are patient and also know what you are doing. I've seen boats that at first glance look like they have been sprayed only to find out that they were hand painted by brush.......Dust free atmosphere and bloody good brushes (I mean expensive) are an absolute must here.

Last of all, rollering especially the 'roll and tip' method. This requires two people working together as a team. One rolls the paint on thinly and the other follows closely with a decent brush and 'tips' out the bubbles left behind by the roller - unbelievably good finishes can be obtained by this method.

A word of warning, no matter which method you use. Don't be tempted to retouch runs or sags in the paint or you will ruin the finish....wait until the paint has fully dried then deal with it! It's tempting but paint always seems to gel quicker than you would think!

A SUMMARY

There are many facets to the successful painting of a boat. We can't be good at all of them and you have to choose the method most suited to you own particular capabilities. A lot depends on the facilities that you have available at your disposal. Some people have the garden to work in others may have huge sheds and even access to a warehouse! I will say that a few basic rules apply to painting even the smallest boat. Often, too much, too clever or too sophisticated is often detrimental to what you are trying to achieve.

I have seen boats that cost twenty grand to paint and they were just really average...why? Wrong choice of painter, that's why. If you are going to choose a painter it's not a crime to ask him to show you some examples of his work. If he's any good there should be plenty...there are plenty of chancers and cowboys about, rest assured. All boats, every single one of them will need retouching or even a repaint within years. Just how long you get for your money is the trick. Unless you put your freshly painted boat in a museum or garage and lock it away you can bet that from day one, it will collect nicks, dings, scratches and scars, it's inevitable. Beware the painter who tells you, 'yes it will be ten grand, but it'll outlast you and me'. The need for repainting is directly proportional to how badly the boat is treated over the years. The only way of keeping your boat pristine and perfect is never to actually put it in that dirty old water once it's done! Be realistic about your own abilities and your expectations. Simple can be better in many cases.

A SIMPLE FORMULA FOR CALCULATING HOW MUCH PAINT YOU NEED (FOR ONE COAT)

This is interesting if not exactly exact! But it gets very close indeed. This is applicable to brushing and rolling only NOT spraying. There's a different formula for that and I don't know it!
THE FORMULA
ONE COAT = The boat's length overall x the beam x 0.85
Divided by square feet covered per litre listed on the paint can instructions.

If you can't work it out the paint manufacturer will tell you if you ring the company hotline.

Over the years, wooden boats have survived the elements in spite of very crude and primitive forms of paint. Many early vessels were simply daubed in pitch, bitumen, turps and beeswax. An early Thames barge had survived for over a hundred years in perfect condition as she was originally used as a bitumen tanker!! The dark brown shiny finish was the most perfect example of preserved wood that I have ever seen. One of the most interesting boats I ever saw was painted with fence paint...the owner reckoned he'd only ever painted it once in thirty years! Another old boat builder I knew once told me the secret of painting a wooden boat was to paint it with as many coats of paint that you could afford!

How To Paint A Wooden Boat

Terry Buddell is a freelance writer, boat builder and marine surveyor who lives on board his own yacht the "Nicky J Miller" with his partner Nicky in Gladstone, Queensland Australia. Terry has designed a series of boats that he sells from his website on the net and also built his own 42' yacht which he refers endearingly to as "his filthy old lugger'. Terry writes for several boating magazines and specializes in the " How to do it " kind of article using practical ideas and basic common sense! Terry is only too happy to help people who wish to build their own boat from a dinghy to a yacht and his contact details can be found on his website http://www.dolphinboatplans.com

If you liked this article there are more in a similar vein to be seen on http://www.dolphinboatplans.com

See Also : No-No-Acne Cosmetics Plus Secret Natural Beauty Tips

Tips for Learning How to Apply Makeup

Learning how to apply makeup takes a little bit of time and a whole lot of practice. Little girls usually start teaching themselves to this well before they're old enough to actually wear makeup. When they're first learning to put on makeup, they tend to look more like clowns than the glamorous movie stars they're trying to look like.

As the girls get older, they start to learn that when makeup is involved, more isn't always better. Though learning it does take a lot of practice, there are some things you can do to help even out your makeup learning curve.

Makeup

Makeup Application Tips

Before you learn how to apply makeup, you need to know what kind of makeup you're applying. There's makeup for the face, eyes, eyebrows and lips. You certainly don't have to use makeup on all of your facial features, but you can. If you decide to use facial makeup, or concealer, make sure to get a concealer shade that matches your face. If you're concealer is too dark or too pale, it will stand out. If you have nice skin, you can bypass concealer or, you can apply it to areas that contain blemishes.

After you've applied facial makeup, you need to move onto your eyes. You should always apply your eye make in this order: eye shadow, eyeliner, mascara. When you apply your makeup, relax your eyelids and look down. This technique will smooth out your eyelids, which will help you apply your makeup more evenly. Move your eye shadow brush from the inside of your eye to the outside of your eye. This will help even out your eye shade color.

Eyeliner will help your eyes standout. However, if you apply too much, you'll look like a raccoon. When you apply eyeliner, use your pointer finger to pull the skin around your eye taught. This will make your eye smooth and allow you to evenly apply the liner.

When you apply makeup, especially when you're just learning this, you should have plenty of Q-tips nearby. The Q-tips will help you wash away or even out any mistakes you may make while learning how to apply makeup.

Tips for Learning How to Apply Makeup

Learn more about makeup and cosmetics by visiting Makeup Joy. We have articles on everything from MAC makeup to estee lauder makeup.

Recommend : No-No-Acne Secret Natural Beauty Tips

Home Improvement Tips to Raise Your Home's Value

Everybody would want to have some renovations and improvements on their homes. Aside from aesthetic and practical benefits, these can also make your beloved homes much more valuable.

When we talk of home renovations, the first things that come to mind are major reconstructions like increasing the floor area or having a total landscape makeover. These projects would greatly increase your home's value but you would also need huge amounts of money to accomplish these. Most people do not have that kind of money that's why it's better for them to concentrate on small home improvements that are wallet-friendly. These minor renovations will add significant value to your homes as well.

Paint

You'd be surprised to know the importance of cleaning. Having a clean house makes it more valuable. The longevity and durability of the house and all its components are greatly increased when cleaned regularly. Through regular and proper cleaning, the wear and tear process significantly slows down.

In cleaning your homes, there is no need to buy expensive chemical cleaners which also has the potential to be a health hazard. A simple mixture of citrus extract and white vinegar can make any surface squeaky clean, eliminate bad odor and kill bacteria and other harmful microbes.

A simple paint job works wonders too. A brand new coating of paint on your house's exterior and interior would make it look almost brand new. Having your floors replaced with brand new ones is a good alternative as well. These projects add value to your homes dramatically.

Whether you opt for a major overhaul or a minor reconstruction, the selection of materials to be used is very crucial and should not be overlooked. Make sure you use materials with A-1 quality; this will ensure success in your home improvement and transform your homes to an almost brand new state.

The paperwork should also be accomplished properly especially if you're doing a major reconstruction to avoid future problems. It is advisable to consult or employ the services of a contractor as well. Professional help is highly recommended to ensure a smooth and hassle-free major renovation project.

Home Improvement Tips to Raise Your Home's Value

If you like my style of writing, please check out CJ WATSON WALLABIES and also check out WALLABIES SHOES

Tags : No-No-Acne

How to Paint the Ocean

How to Paint the Ocean Easily! Painting the ocean can be done either by depicting still calm water such as in an evening scene with a lone sailboat in the moonlight or by depicting restless waves crashing along the rocky shoreline. When people think of painting the ocean they often think to paint ripply blue movements of paint. The key to painting realistic water is to focus on using the correct color of paint and the correct brushstroke.

Painting Still Water - To get the effect of still water in a daytime scene you want to have the water contain the same color as the sky. It does not have to be exact but it should be similar. Don't be afraid to use green, burnt sienna and purple in the blue to create dramatic shading. Water along shorelines appears darker, so you would want to darken it up with the colors mentioned. Remember that deep water in an evening ocean scene would probably contain very little blue and would appear mostly green. As you add color don't blend it completely, let the variations show. In order for the water to appear still, keep the brush strokes short and horizontal. Of course if the scene is depicting a completely still ocean you could allow the strokes to become longer but again, keep them horizontal. One last tip for still water realism is to paint the reflections of ships, lighthouses, etc in the waters. 
 
Painting Restless or Rough Water - The movement of waves crashing against the shore always enhances a painting. You will first under-paint with the main water color. A nice dark mixture of green, blue and burnt sienna works nicely. As you paint it in, let the variations of color show. The choppy brushstrokes will create the illusion of movement. When you are done, use a lighter version of the mixture and stroke in some wave action. This will look like wavy lines. Don't make them all the way across the painting. Do some here and there. The closer that you work toward the front of the painting make the wavy lines larger or more up and down. To create the effect of splashes, use white and gently dab it along the wavy line. If you want the wave to get larger, dab the white higher on the line. Again, don't keep it continuous. If the line looks too awkward, just paint over it with the main water color. With the liner brush, now take white and with curved strokes pull a few streaks down the wave and into the water.  You should really study other paintings or photos and try to mimic what you see. If the scene has a shoreline or rocks, you can create very dramatic splashes by dabbing white basically wherever the water hits the rocks. 
 
There are dozens of ocean scene variations and it would be untrue if anyone told you that you could only paint water a certain way. The best way to learn is by following tutorials and practicing.  Don't be afraid to experiment and don't forget to focus on using the correct colors and brush strokes.

Paint

How to Paint the Ocean

Together - with step-by-step lessons and your desire to learn drawing and painting techniques we will bring out that true creativity inside of you and create beautiful works of art! To see acrylic tips, tricks, lessons and to Learn Painting Techniques visit my how to paint instructional site. The best way to begin painting is to follow prescribed instruction and get your feet wet. With a little practice, you will be well on your way to a rewarding hobby of painting. Let http://www.IamPainting.org show you how!

Recommend : Make Up How To No-No-Acne

What is the Best Makeup to Hide Fine Lines and Wrinkles

Searching for the best makeup to hide fine lines and wrinkles is sometimes an easy job. In fact, you should know a few things about this problem before you start searching for a solution.

Let's face it: everyone hates wrinkles. It doesn't matter if they are just some barely visible fine lines or rough wrinkles; you want to forget them as soon as possible. Many people think that an easy way to do this is by covering the problem with makeup. Why does this happen? The reason is simple.

Makeup

We are thought to think that makeup is perfect for hiding defects. When you go to bed at night, you can take off your makeup and no one will see your flaws. This is a great strategy in theory, but it has some disadvantages. Firstly, there are many make up products which will hurt your skin. This way, you will not only have to cover your wrinkles, but potential rashes and other defects. The second disadvantage of using even the best makeup to hide fine lines and wrinkles is that it won't solve your problem.

Many people use makeup because they think that wrinkles can't be treated. This is exactly why they prefer covering them instead of using a natural skin cream which can solve the problem without repercussions. How can a skin cream work? It's easier than you might think.

With the right proteins, your body will clear the wrinkles in a matter of days and a good skin care cream will make you produce more collagen and elastin. After a few treatments, you will see the results. Unlike other options, skin care creams can be cheaper than makeup and it can have permanent results with no disadvantages.

Basically, the only thing that you need to do for solving wrinkle problems is to find a natural cream. Get started with the internet and you will be able to notice a few natural ingredients which have been verified scientifically. Unlike with makeup, your face will always be safe and the problem will get a fast and reliable solution, without too much effort.

What is the Best Makeup to Hide Fine Lines and Wrinkles

Click Here [http://www.natural-skin-care-resource.com] to Discover the Results of my Research on the Most Effective Skin Care health products. If you have unwanted wrinkles, fine lines, and damaged skin visit [http://www.natural-skin-care-resource.com] to discover the shocking truth that now one else wants to expose.

Recommend : Cosmetics Plus Secret Natural Beauty Tips Make Up How To

What's the Difference Between Mineral Makeup and Regular Makeup?

The latest buzz in the beauty industry would without a doubt be the emergence of mineral make-up. Primarily as a foundation, you can also find mineral makeup in blush and eyeshadow formulations as well.

The main difference between mineral and regular makeup is in the ingredients used to create the product and that most mineral makeup is in powder form. Of course other factors such as how it looks on your skin and the added natural benefits are a reason it is becoming such a hit with beauty shoppers.

Makeup

While most mineral cosmetics claim to be made with natural or safe ingredients, it is still important to read the ingredient list as some companies may include some chemical compounds. If at all possible, avoid paraben preservatives and choose only 100% certified organic mineral makeup.

Another benefit is that the makeup offers a natural sun protection. While not as high as your SPF 15+'s, it still provides adequate cover if you are just going shopping or out and about during the day.

It doesn't clog pores which is great news for those with oily or problem skin, and depending how it is applied can also minimize the appearance of fine lines and imperfections.

Women of all ages and skin types (even sensitive) can use mineral makeup although those with dry skin may need to use a moisturizing lotion underneath their foundation.

Because it generally comes in powder form it needs to be applied with a brush, but a damp sponge can also work giving a heavier finish. Blending in a circular motion usually gives the best look.

Another reason that many people are choosing it over regular cosmetics is that it gives a very natural 'no makeup' look. It makes you look if you have perfectly flawless skin when that may not really be the case at all!

What's the Difference Between Mineral Makeup and Regular Makeup?

Tracey is the health and beauty editor of Lazy Spa Girl and uses only certified organic mineral makeup.

[http://www.green-skincare.com/]

Recommend : No-No-Acne Make Up How To

The Genetic Makeup of American Rottweilers

Most people do not realize that there are two types of Rottweilers. This is because there is very little difference between the two. The two types of Rottweilers are the American Rottweiler and the German Rottweiler. The German Rottweiler is shorter, stockier and more muscular than the American Rottweiler. The American Rottweiler is taller and thinner through the face and body.

Both the American Rottweiler and the German Rottweiler are black with distinct tan markings over both eyes, cheeks, muzzle and chest. Both have coats that are medium length, coarse and straight and both have a double undercoat.

Makeup

The American Rottweiler is very protective of its owner and their possessions so make very good guard dogs. They have a great sense of humor and are happiest when performing a task. These dogs are sometimes called gentle bears by their owners because of their loving personalities. The male American Rottweiler ranges between eighty-five and one hundred thirty-five pounds and the female between sixty and one hundred pounds.

The American Rottweiler is becoming known as an excellent therapy dog and is becoming very well known with the physically challenged. He is a very intelligent dog and a hard working dog. He aims to please and is happiest when performing a task. However, these dogs can be stubborn and need to be trained and socialized at a very early age.

If obedience training does not occur at an early age the American Rottweiler can become a bully and will have other undesirable behavioral problems. These dogs excel in sports such as herding, carting, flyball and agility. The American Rottweiler is a relatively healthy dog breed. He tends towards hip dysplasia, as do other large dog breeds and he in the last few decades has a tendency toward cancer. If any moles or lumps should suddenly appear on his body it is imperative that you take him to the vet and have it checked out thoroughly.

Reputable American Rottweiler breeders should not be difficult to locate. They can normally be found on the Internet, through recommendations from other Rottweiler owners, through your veterinarian and from the American Kennel Club. These breeders should be socializing their puppies with their own families to get them customized to humans. They should be able to answer all of your questions about the breed and will normally turn the tables on you and ask you many questions to see if you are ready to own an American Rottweiler.

There are German Rottweiler breeders and American Rottweiler breeders and if you have done your homework sufficiently, you will know the distinct difference between the two. Having a discussion with the breeder about the two types of Rottweilers is a good idea.

These dogs make great pets and because of their size will become excellent guard dogs. They are not aware of their size and when their humor comes through it is quite silly.

The Genetic Makeup of American Rottweilers

Sharon Davies has been asked to speak at many charitable events benefiting animal rescue shelters. Rottweiler types working as guard dogs will give you a taste of their strong personalities. The grooming of American Rottweilers can be found in any book with Rottweiler information.

Tags : Cosmetics Plus

Facials and Makeup for Brides - How to Best Prepare for Your Wedding

No matter how much you try to scrub, wash and moisturize your face and body prior to your wedding day, without professional knowledge and products you can't possibly make much difference. It can be so disappointing to see flaws in your skin when you receive your wedding photos, and the best way to avoid it happening to you is to have a skin plan for preparing for your big day.

Starting right now, the first and most important thing to do is increase your water intake. Keep bottled water everywhere: in the fridge, in the car, on your desk, by the bed and in the bathroom. Every time you see the water, have a drink, and the benefits will be seen after only one week. Continue drinking around two liters of water per day, and avoid alcohol and sugary foods or drinks. Exercise is also fantastic for the way your skin looks, and nothing will achieve the healthy glow like regular visits to the gym and good food.

Makeup

There are some natural things you can do at home to help skin problems, and these can be done regularly every night. For open pores, blackheads and problem skin a great solution is to rub half a tomato over your face, chest and neck, leaving it on for fifteen minutes. The acid in the tomato along with antioxidants are great for balancing and cleaning clogged pores. For tough, thick skin you can use ground rock salt and avocado for a facial scrub, but if your skin is fragile this is not recommended. For a gentler scrub soak some oats in a bowl of warm water for a minute or two, using them before they become completely soft. Rub the oats in a circular motion for five minutes over your whole face, neck and chest, softly removing dead skin cells and soothing any irritations. If you have very bad blackheads you can use colorless, odorless iodine mixed with rock salt to scrub. Only scrub it on the areas that are toughened with a lot of blocked pores, and do it for the moths coming up to the wedding. Stop one month before, or when your beautician recommends.

You should definitely include in your wedding budget some visits to a beautician, and this is where the planning comes in to it. Any good beauty therapist will offer a free skin analysis to potential customers, and the sooner you have that the better. Through evaluation and discussions about what you would like to achieve with your skin, you can work out a schedule for ensuring you achieve your goal by the wedding day. It could possibly involve some micro-dermbrasion, chemical peels or simply regular visits for facials. The added bonus is you get to talk in length about how you want your makeup and hair to be for the day, as well as any waxing or manicure plans.

Never compromise on your beauty requirements for the wedding: no matter how many times your man tells you that you are fine the way you are and he doesn't want anything fancy, every man appreciates the fantasy when he sees you looking more beautiful than ever. It is a day you have always dreamed of, so make it a dream come true! Wedding photos where the bride has gone to little or no effort with make-up look horribly drab and boring. If you can't look beautiful on the most important day for your future life, when can you? Splurge and hire a professional beauty therapist to do your face, and go through a basic practice run with them prior to the day to make sure you like what they have in mind for you.

If you look after your skin at home and follow a plan for improvement with the beauty therapist, you should have the result of looking your best on your special day. Don't look at your photos with pangs of regret because you didn't do anything about it at the time, and include it in part of your overall plans, like ordering caterers and booking the church. You will have a much better time when you are feeling confident and beautiful, so go on and treat yourself, and if you are lucky your husband will love it so much he will be happy for you to go regularly.

Facials and Makeup for Brides - How to Best Prepare for Your Wedding

Yolanda is the owner of Yolandas Wedding Favors. She sells many different types of wedding reception favors such as, love glass coasters, two peas in a pod salt and pepper shakers and many many more.

Yolandas Wedding Favors also carries many different wedding accessories and wedding gifts such as guest books, unity candles, ring pillows, bridesmaid gifts, groomsmen gifts and many many more.

Tags : Secret Natural Beauty Tips Make Up How To Facial Fack Mask

Removing Skunk Smell From a Dog - Is It Possible?

Removing skunk smell from a dog might sound like a funny title to someone who has not been faced with this problem. However, since you are reading this you are probably experiencing this. Removing skunk smell from a dog can be virtually impossible, unless you know the exact way to do this. The reason is, mercaptans are a group of organic chemicals, which form a strong bond with natural fibers and are impossible to clean, unless you counteract with the chemical.

The skunk secretions have a very profound effect on humans, even in extremely low concentrations, and if your dog has been sprayed by a skunk do not kid yourself - the amount of one spraying is enough to "infect" more than 1000 dogs with a very strong chemical makeup. That's because of the extreme sensitivity of the human nose to mercaptans. Fortunately, the problem can still be resolved quite easily with commonly found household items. We will discuss this later.

Makeup

If you live in the United States, skunks are commonly found outside of houses and can present a huge problem, despite the funniness which most people associate to this issue. If a skunk sprayed your outside door or house, the problem can be resolved more easily, but when it is on a dog the soft fibers absorb some of the chemicals, and that's why many people go to their final resort - shaving the dog completely. That is very dangerous, and not recommended as there are easier ways to deal with this problem. The first thing that people try is usually washing the dog with soap and water. Here is why that doesn't work - hair fibers absorb moisture, and when they are sprayed by a skunk they absorb tiny amount of the chemicals. When you wash the dog, the problem becomes worse, because chemicals are forced deeper into the hair's. Removing skunk smell from even a flat surface can present quite a challenge, which you probably know already.

The problem is not only cosmetic - the mercaptans tend to irritate the dog, as dogs have hundreds of times stronger sense of smell than humans. You can imagine how a dog will feel like, given that sensitivity to the poison. The problem is bigger when you have a smaller and more sensitive dog, which you cannot keep outside the house for long, because of the cold. Until you apply a solution for the skunk smell, keeping the dog soaped with water is a good measure, since the layer of water will block the smell temporarily.

Removing Skunk Smell From a Dog - Is It Possible?

Here is a very quick way to permanently eliminate the skunk smell on a dog: http://www.squidoo.com/skunk-removal

Recommend : Cosmetics Plus No-No-Acne Secret Natural Beauty Tips

Kitchen Cabinet Paint Ideas - Are Glazed Kitchen Cabinets DIY Friendly?

Who wouldn't love the look of glazed kitchen cabinets boasting a touch of vanilla bean over the raw naked maple which is exposed on the edges. While antique painting kitchen cabinets is a hot trend, the price tag associated with this style is not. It is out of range for many who are hoping to update the look of their kitchen- not rack up debt to the tune of the price of a luxury vehicle.

The kitchen cabinet paint ideas discussed in this article will help you achieve the look of transforming your kitchen from blah to amazing.

Paint

Glazing kitchen cabinets gives the newly painted kitchen cabinet an older look which is very trendy now. It also complements the look of your kitchen, while muting the modern look of stainless steel which is so popular in kitchens today.

The one thing to remember with glazed kitchen cabinets is it is not a textbook process. It is one that takes a certain flair for artistry when deciding where and how much glaze to remove to achieve the 'aged' look. Before you panic, remember it is also a very forgiving process. Glazing kitchen cabinets allows one to wipe the slate clean if you don't like the look and start over. Just make sure to work quickly before the glaze begins to dry.

Basically the steps involved are mixing the paint and glaze together to
achieve the color you desire, apply the glaze to the door and wipe off as little or as much as you choose. Let paint dry thoroughly and move onto the cabinet drawers and bases performing the same steps. Let everything dry at least a day to assure the surfaces are not tacky when rehanging doors. For free, detailed step by step instructions in the glazing process, click the link in the resource box below.

Things to keep in mind when painting or staining your kitchen are as follows. Remember your kitchen will not be 100% functional again until the entire project is completed. Do you have a place to prepare and store food and dishes during this time? Plan ahead and decide where you will be doing this. Remember that you will be removing your kitchen cabinet doors from their frame and will probably have then laid out throughout your kitchen to apply paint and dry, unless you have an enclosed garage or workshop this can be done in during the summer months.

Check the surface of the cabinets you are working with. What techniques have been done previously to these? If they've been stained or a urethane coat has been applied you must first apply a base coat of a special primer-sealer to ensure adhesion of the paint you are applying.

If you prefer a more weathered look in your glazing treatment, apply the glaze compound after the paint is fully dried. For this treatment it is recommended to use a light base coat of paint and a darker glaze. Always apply glaze first then a little at a time apply the dark paint color until you reach the desired consistency and color. It's better to go light by adding a little at a time than to add a lot of color right away. When removing the glaze mixture with a rag leave additional glaze in corners to achieve the aged old world look.

To finish off the look, update your kitchen cabinets with new hardware to set the tone for the style you are portraying in your kitchen. Before you know it you will have a kitchen that looks like a million bucks for not alot of bucks!

Kitchen Cabinet Paint Ideas - Are Glazed Kitchen Cabinets DIY Friendly?

Phil Rimstidt is passionate about helping others achieve the results they desire in their home without spending alot of money. As a result of his own experiences he has created a website dedicated to helping others who are attempting to update their kitchens by changing its style to reflect the trends of today. For further information visit http://www.kitchen-cabinet-design-ideas.com/index.html to find free, DIY friendly tips on recreating the kitchen of your dreams.

See Also : Cosmetics Plus Facial Fack Mask